Kyosho Inferno MP9 TKI4 V2 1:8 RC Nitro Readyset w/KE21SP Engine

Et helt utrolig bra Nitro readyset fra Kyosho. Om du har lyst på nitrobuggy så har du nå funnet modellen du bør ha! Anbefales varmt! Nå; Fri frakt i hele Norge!

TilbudNOK7 150,00 Førpris:NOK7 490,00 Rabatt -5% inkl. mva.
På lager: 1 stk.
På lager: 1 stk.


Take the incredible performance of the MP9 TKI4 straight from the box to the race circuit with this Readyset!


With 8 world championship titles, the Inferno has set the standard as the most powerful 1/8 scale engine racing buggy of all time. The DNA of the competition-level MP9 TKI4 model and its advanced racing technology is embodied in this Readyset “MP9 TKI4 V2”. The MP9 TKI4’s signature long front sus arms and 17.5°caster angle front hub carriers realize superior cornering stability and sharp control while the adoption of a forward cabin type body increases downforce, using the Inferno’s aerodynamic performance advantage to deliver balanced cornering and optimal traction. Including the user-friendly and high torque KE21SP engine fitted with recoil starter and rear existing exhaust, anyone wishing to challenge the peak of 1/8 engine buggy performance can find the perfect racing partner in this MP9 TKI4.


*Rib reinforcement of the TKI4 long type front sus arms adds extra strength and delivers improved steering response, surface tracing and cornering performance.
*Dust guards not only prevent mud sticking on the rear suspension arms but also stop grass from catching in the drive shaft and protect the shock shafts.
*Readyset contains a pre-assembled chassis and body, including everything except batteries for the transmitter/receiver and engine starting tools. Can be ready for action the same day you buy it.
*Both steering and throttle are equipped with Waterproof high-torque KS5031-09MW servos.
*Precision setting adjustment of wheelbase, tread, toe angle, camber angle, caster angle and roll center etc.
*High heat dissipation from the brake disk and large capacity center differential deliver control stability, right through to the end of the race.
*Features a large capacity air cleaner that extends the maintenance cycle.
*Wide variety of optional parts provides extensive scope for performance tuning.

Forward positioning of the receiver batteries with the incorporation of the TKI3 layout realizes superior controllability. Race-proven design know-how delivers the dynamic combination of competition-level performance and reliability.
KE21SP engine features an optimal balance of power, torque, and starting and idling stability. Includes a break-in ring that makes it easy for beginners to break the engine in properly.
Machined aluminum big bore oil shocks deliver excellent shock absorption and running stability under various driving situations.
Front Shock Stay of MP9 TKI4 V2 reinforced to 5mm thickness from 3mm one of previous type to dramatically improve durability and rigidity, further improves stability and traction when jump landing.
Large 17.5°caster angle front hub carriers improve running stability over rough surfaces and through sticky corners.
Installed stabilizers on front and rear control chassis roll when cornering and contribute to improved steering response.
The newly designed “K-Blox” tires improve grip on various on-road and off-road surfaces with changing higher pins.
Includes forward cabin type body design that generates high down force for superior traction and turning.
Adjust settings easily with jog dials while viewing the LCD screen on the included 2.4GHz Syncro KT-331P transmitter.


■Length 490mm
■Width 307mm
■Height 180mm
■Ground Clearance 28mm
■Wheelbase 325mm (4 settings available by changing rear hub collar position)
■Tread (F/R) 254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R) φ116 x 44mm
■Gear Ratio 11.7:1
■Weight 3,370g approx.
■Engine KE21SP (recoil starter installed/rear exhaust)


<Kit Contents>
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21SP engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench


<Required for Operation>
●AA x 8 alkaline batteries for transmitter
●Starting tools (Fuel bottle, Plug heater)