QuicRun 10BL60 Sensored ESC + 17.5T Ares Pro Combo

Robust, smart og prisgunstig esc fra Hobbywing. Børsteløs, og takler både sensorbaserte og sensorløse motorer. Vifte følger med. Vi legger til Ares sin Efra godkjente Pro 17.5T. Uslåelig combopris for 17.5T klassen i Mchassis eller 2wd buggy.

TilbudNOK990,00 Førpris:NOK1 099,00 Rabatt -10% inkl. mva.
Artikkelnr.:
30108000
  • Produktinfo
  • Produktanmeldelser (0)

 

  • ESC:

    Easy Operation
    This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation.

    Compact Design & SD/SL Dual Mode Supported
    With the compact design, it’s applicable to various chassis. With the Dual (Sensored/Sensorless) Drive Mode, it’s compatible with different motors and brings racers two different control feel.

    High Reliability & Durability
    Reliable hardware combined with advanced software technology allows the QUICRUN 10BL60-SD to not only provide high power output but also overload protection of the ESC circuit.

    Efficient Cooling System
    Hobbywing patented heat-conductive copper bar cover on the power board of the QUICRUN 10BL60-SD, which can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum heat sink housing, combined with high-performance cooling fan can keep your ESC as cool as possible.

    Single-button Programming & Factory Reset
    The SET button on the ESC allows the user to easily program or factory reset the ESC with ease.

    Wide Applicability
    This ESC is designed for practice and daily training of1/10th, 1/12th scale touring cars, buggies, and F1.


    Specifications
    • Scale: 1/10th
    • Brushed/Brushless: BL
    • Sensored/Sensorless: SD
    • Waterproof: No
    • Cont./Peak Current: 60A/380A
    • Input: 2-3S LiPo/6-9 Cells NiMH
    • BEC Output: Linear Mode: 6V/2A


    Wires & Connectors

    • Input Wires: Red-12AWG-200mm*1/Black-12AWG-200mm*1
    • Output Wires: Blue-12AWG-200mm*1/Yellow-12AWG-200mm*1/Orange-12AWG-200mm*1
    • Input Connectors: No
    • Output Connecotors: No

    (Note: All the wire length above is the original length not the length you see from the outside.)


    Fan

    • Size: 25.0x25.0x10.0mm
    • Voltage Range: 5-8.4V
    • Powered by: Powered by BEC


    ESC Programing via

    • SET Button on ESC: Supported
    • LED Program Box: Supported
    • LCD Program Box: Not Supported
    • WiFi Module: Not Supported
    • Program Port: Program/Throttle Wire


    Firmware

    • Firmware Upgrade: Not Supported


    Size & Weight

    • Size: 33x28x31.5mm (w/ Fan)
    • Weight: 59g


    Applications

    • Motors: SL BL Motors/SD BL Motors
    • Vehicles: 1/10th Touring Cars/Buggies/Drift Cars/F1


    KV Rating/T Count:

    • 2S LiPo: 1/10th Touring Cars≥8.5T, 1/10th Buggies≥13.5T 
    • 3S LiPo: 1/10th Touring Cars≥13.5T, 1/10 Buggies≥17.5T
    • (3650 Motors)







    Sensored motor wiring
    When using sensored brushless motor, please connect the “SENSOR” port of the ESC and the the “SENSOR” port of the motor with a sensor wire. For sensored brushless motor, the #A, #B, #C wires of the ESC MUST be connected with the motor wire #A, #B, #C respectively. Do not change the wires sequence optionally! (#A is Blue, #B is Yellow, #C is Orange.)

    Sensorless motor wiring
    When using sensorless brushless motor, the #A, #B, #C wires of the ESC can be connected with the motor wires freely (without any order). If the motor runs in the opposite direction, please swap any two wire connections. Please disconnect the battery from the ESC after running the car!
     

 

  • Motor:

1/10 motor som kan brukes både med og uten sensorbasert regulator. Motoren har justerbar timing og doble sensorporter for mer allsidig tilkobling. 3,2mm aksling 2-polet motor. Se bilde for spesifikasjoner.


* CNC Machined Billet T6 Aluminum Heatsink Can

* High Purity Copper Windings Maximizes Conductivity

* High Power Solder Tabs

* Removable/Replaceable Rotor

* Powerful Sintered Neodymium Magnet

* Precision Engineered for Maximum Energy Conversion

* Dual Sensor Port

* Incorporate Radial Fan in Front End Bell

* Adjustable Timing

* Compatible with any Sensored/ Sensorless ESC

* IFMAR, ROAR Compliance

 

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.